- Use natural light. Avoid a flash so your pet doesn't look like a red-eye demon. Also, camera
- flashes can scare your pet and send it scurrying for cover. Instead, use natural light by taking your pet outdoors or by positioning it near a bright window indoors. If your pet has a favorite perch or bed it sleeps on, move it closer to the window before the photo session.
- Don't shoot at high noon. Outdoors, take your pet's picture when the sun is rising or setting. If you photograph your pet when the sun is directly overhead, the resulting portrait will have too much contrast between light and dark areas. The best time to photograph is when the sun is coming in at an angle or when there is a slightly overcast sky.
- Aim for the eyes. Photographing pets isn't much different than photographing people. You want your photograph to capture the subjects' personality, whether they are human or animal. That's why you should always focus on your pet's eyes to reflect the true nature of your pet.
- Get down to pet level. One of the most common mistakes people make when they photograph their pets is to point the camera from their level. Inevitably, the animal ends up looking like a furry blob lost in the background. Instead, get down to your pet's eye level and photograph it as another dog or cat might see it.
- Timing is everything. Sometimes the best way to get a great pet portrait is when the animal is just waking up or going to sleep. A tired pet makes a great model. Certainly if you want to catch your pet in action (running, swimming, jumping), you'll need to get it a bit excited. But, for most pet portraits, you'll have better luck if your cat or dog is tuckered out and calm.
- Go to your pet. When you are ready to photograph your pet, don't drag it across the room by its collar and start snapping photographs. That will put your pet on high alert and make it nervous. Dogs can be difficult to pose. Instead, approach your dog where it is so that it is relaxed and calm.
- Use the element of surprise. If your pet isn't posed exactly the way you want it, try surprising it with a squeaky toy or high-pitched noise. Hold the toy directly over your head to encourage your pet to look directly at you. Or, have an assistant stand behind you to get the animal's attention.
- Try a long lens. If your camera has a zoom function or if you own a telephoto lens, it can be a very effective tool for pet photography. With a telephoto lens, you can get a great photo of your pet in a natural setting without your pet even realizing that you are stalking it. A telephoto or zoom lens will also allow you to experiment a little by zeroing in on your pet's face, fur, or body.
- Change the venue. Active pets can be a challenge to photograph. If your pet won't sit still, try moving it to a spot it is familiar with to slow it up a bit. For example, if your dog loves to ride in the car, let Fido hop into the passenger seat, roll down the window, and capture the image that way. For cats, try putting them on a safe shelf or the back of a chair so that they have to think for a minute or two about where to go next. Never put your pet in danger, but sometimes by moving your hyperactive animal to a different location, it will slow it down just long enough for you to squeeze the shutter.
- Watch the background. When you are trying to focus on an active animal, you don't always pay attention to the background. A messy living room or a cluttered backyard will ruin even the best photo, so think about the environment before you break out the camera. Indoors, pick up the kid's toys, scattered newspapers, or stray coffee cups. Outdoors, put away garden hoses, garbage cans, or bicycles.
- Mix angles. Vary the framing of your photos by including tight closeups, full body shots, and three-quarter images. That way, you'll have a lot to choose from and you might even capture physical features of your pet that you never noticed before. For example, by focusing on just your cat's tail, you might notice stripes, spots, or bits of color that didn't stand out previously.
- Be patient. Never turn a photo session into a wrestling match. If your pet won't pose exactly the way you want, stop the photo session and try again another day. The great thing about digital photography is that you can shoot endless exposures and easily destroy all the bad shots.
CATEGORY >
Showing posts with label Pet Craft Projects. Show all posts
Looking for a way to keep your pooch or pussycat off the sofa? Maybe -- just maybe -- providing your four-footed family friend with his or her very own comfy couch will do the trick. We gave our pet bed an off-white antiqued finish that should withstand gnawing. For a perfect-fitting mattress, sew a simple square pillow. It'll let Rover roll over in comfort.
Note: Be sure to print out and study all instructions as well as the plans displayed on the last page of this article.
You'll need intermediate woodworking skills and a few power tools to get the job done. Construction should take a day or so, plus several evenings for filling nail holes, sanding, and applying a finish. Cost: approximately $50.
What You Need:
- Table, radial-arm, or portable circular saw
- Router
- Tape measure
- Chisel
- Framing square
- Combination square
- Bar or pipe clamps
- Drill
- Hammer
- Nail set
- 80-, 100-, and 120-grit sandpaper
- Paintbrush
- Four 16-inch pieces of 2 x 2 lumber for the uprights (A)
- Four 21-inch pieces of 2 x 2 lumber for the cross members (B)
- Two 8-1/2 x 21-1/2-inch pieces of 3/8-inch plywood beaded-board paneling for the end panels (C)
- Two 27-3/4-inch pieces of 1 x 6 lumber for the side rails (D)
- One 22-1/4 x 27-inch piece of 3/8-inch plywood beaded-board paneling for the bottom (E)
- Four 3 x 3-inch pieces of 1/2-inch lumber for the caps (F)
- Four 2-inch-diameter wood ball finials (G)
- Woodworker's glue, finishing nails
- Wood filler
- Primer and paint, or stain and clear finish
- Pillow sized to fit the bed (approx. 22 x 28 inches)
Start with the End Frames
1. Cut the 2 x 2 uprights (A -- see diagram on previous page) and cross members (B) to length. Next, rout a 1/4-inch-deep by 3/8-inch-wide dado, centered, along one side of each cross member. These will hold the end panels (C). Measure carefully and use a combination square to mark a 3/8-inch-wide by 3/4-inch-deep mortise in each upright. Position the 5-1/2-inch-long mortises 4 inches from the bottoms of the uprights. Rout the mortises and square the ends with a chisel.2. Now rout a 1/4-inch-deep by 3/8-inch-wide dado, centered, in one side of each upright to hold the end panels. Position the 8-1/2-inch-long dadoes 5-1/4 inches from the bottoms of the uprights.Construct the End Assemblies
3. Use a framing square to map cuts for the two plywood beaded-board end panels (C). They should measure 8-1/2 inches high by 21-1/2 inches wide.4. For each end of the bed, glue and nail one end of both cross members to one upright, drilling pilot holes for the nails. (If you prefer, you can join the uprights and cross members with doweled joints.) Slide each end panel into place. Don't bother gluing them; a slightly loose fit accommodates expansion and contraction. Attach the second set of uprights to the cross members with glue and nails. Clamp the end assemblies until the glue dries.Attach Side Rails and Bottom
5. Cut the 1 x 6 side rails (D) to length, then rout a 1/4-inch-deep by 3/8-inch-wide dado 1/2 inch from the bottom edge of each rail. Cut the plywood beaded-board bottom (E) to size.6. Attach the side rails to one end assembly, gluing one end of each rail to a mortise in an upright. Slide the bottom (E) in place, then glue the other ends of the rails to mortises in the second end assembly. Strengthen the mortise joints by drilling pilot holes and driving two finish nails into the side of each upright and through the rail ends. Clamp the joints until the glue dries.Finish Up
7. Top each upright with a 1/2-inch-thick cap (F). Glue the caps in place; then drill pilot holes, and screw on the 2-inch-diameter ball finials (G).8. With a nail set, countersink all nailheads, then fill the countersink holes with wood filler. Sand all surfaces, inside and out, then apply the finish of your choice. We primed our bed, then brushed on a light-brown base coat followed by off-white glazing. Allow finish to dry thoroughly.9. Finally, set the pillow in place, and invite your pet on board.
Instructions
Note: This pattern is a 4-stitch I-cord and is worked holding both strands of yarn together.
Cast on 4 sts. *Do not turn. Slide sts to opposite end of needle.
Take yarn across back of sts and k4; rep from * until collar measures desired length (fits around dog's neck plus 1 to1 1/2 inches). Bind off until 1 st rem.
Transfer st to crochet hook and ch 8; sl st into same st as beg ch; fasten off. Trim ends even with ends of Fun Fur. Sew on button.
Skill Level: Easy
Finished Measurements: Approx 8 inches long, plus button loop
Yarn
- Lion Brand Lion Suede (Art. 210): 100% polyester; 3 oz. (85 g); 122 yds. (110 m); bulky weight, 1 skein #125 Mocha
Needles & Extras
- Size 9 (6 mm) knitting needles
- Size H/8 (5 mm) crochet hook
- Button to fit button-loop opening (we used JHB #92825 Silver Pooch)
- Blunt-end yarn needle
Instructions
Note: This pattern makes a 2-stitch I-cord along both sides, and the center stitch is worked in Garter stitch (knit all rows). The collar is reversible.
Cast on 5 sts.
Row 1: K3; leaving yarn at back of work, sl last 2 sts pwise; turn.
Row 2: P2, k1, bring yarn to front of work and sl last 2 sts pwise; turn.
Rep Rows 1 and 2 for desired length (circumference of dog's neck plus 1 to 1 1/2 inches). Bind off last row until 1 st rem; transfer st to crochet hook, ch 6, sl st into first bind-off st; fasten off. Weave in ends. Sew on button.
- For the dog cushion cover, mix squares of white denim and prequilted fabrics. First cut the denim and prequilted fabrics into 7-1/2-inch squares, which includes 1/2-inch seam allowances.
- Stamp the denim squares, using a different paint color for each kind of flower. Create a layered look by overlapping the stamps, letting each layer dry before applying the next.
- Work on a covered surface, and let some of the stamps overlap the edges of the denim. Sew enough squares together to cover the top of the cushion, and add a bright border. Note: If you aren't re-covering an existing dog bed, consider using a worn sofa cushion. Or cover large slabs of foam with thick quilt batting for the base.
- From prequilted fabric, cut a bottom to match the pieced top, and cut and piece a boxing strip (for the sides). Continue by following Boxed Wrap instructions.
What You Need:
- 1 1/2 yards of matelasse fabric
- 4 1/4 yards of 5/32-inch cord for piping
- Polyester fiberfill
- 2 2-1/2-inch-diameter covered-button forms
- Heavy thread
- Long upholstery needle
Instructions:
The finished pillow measures 18 x 18 x 4 1/2 inches square
Cut the Fabrics
Cut matelasse fabric as follows: two 19-inch squares for the pillow front and back, one 5-1/2-x-75-inch strip for boxing (piecing as needed), and enough 1-1/2-inch-wide bias strips to equal 4 1/4 yards for piping.
Instructions:
- Sew piping. Beginning at the center of one edge of the pillow front, pin the piping to the right side so the raw edges are aligned and the rounded edge faces inward. Snip the piping seam allowances at the corners for a smooth fit. Sew the piping to the pillow front. Repeat to sew piping to the back.
- Pin the boxing strip to the edges of the pillow front, beginning at the center of one edge and sandwiching piping between layers; sew. Trim excess boxing strip, allowing for a 1/2-inch side seam allowance. Sew short ends of the strip together. Sew remaining edge of the boxing strip to the pillow back, leaving an opening for turning. Turn right side out and stuff firmly with fiberfill; sew the opening closed.
- Cover the button forms with scraps of matelasse, following the manufacturer's instructions. Use heavy thread to sew the buttons centered on the pillow front and back, pulling the thread tight between the buttons to create indentations.
Labels
- CARING FOR YOUR PET
- dog training
- dog's care
- family pet
- Pet Craft Projects
- pet health
Welcome to our website
https://www.econonews1.com/
my site talking about pets like
Pet Craft Projects, pet health , family pet , dog training
Thank you for your visit



